Author Topic: New Burnside Pumper (Read 212738 times)

OMGWTF · « **Reply #200 on:** July 17, 2008, 07:12:59 PM »

Quote from: CFS_Firey on July 16, 2008, 02:10:43 PM

Quote from: scotty on July 14, 2008, 01:12:12 PM
barker had to send two appliances as hahndorf could not crew

Must have been a big car!

Hah!!! Said the member from Lofty Group...

Alan J · « **Reply #201 on:** July 17, 2008, 08:08:49 PM »

Quote from: Zippy on July 17, 2008, 07:01:46 PM

Quote
It is going to make things hard when barker rescue is committed to an mva the other side of meadows supporting fellow group brigades and something happens in mt barker township and the mt barker brigade cannot get the support back from the next pumper in the group.

Every other brigade has the same issue mate, if ya primary pumper is out at a RCR or Hazmat....Simple solution...Call another brigade....the closest and most appropriate.

And that would be.... Murray Bridge or Glen Osmond ?

CFS_Firey · « **Reply #202 on:** July 17, 2008, 10:04:57 PM »

Quote from: big bronto on July 17, 2008, 06:32:41 PM

It is not about how much water was used at the car fire, standard response for the crews at mt barker, 2 trucks on all calls in their primary area, since the primary pumper failed on this job they sent back up from their station since they had crew, going out of their area for a "report" of car fire could end up in being anything so back up was coming since the primary brigade failed, i don't see the problem with this, if anything it shows a quality of service being provided and maybe highlighting to some people in higher places that a 2nd pumper should return to mt barker and is not required in some other place just down the street. It is going to make things hard when barker rescue is committed to an mva the other side of meadows supporting fellow group brigades and something happens in mt barker township and the mt barker brigade cannot get the support back from the next pumper in the group.

So committing one truck at an MVA leaves the township uncovered, but committing 2 trucks to a car fire is providing a quality of service to the community?

Only kidding mate, I understand where you're coming from...

Quote from: OMGWTF on July 17, 2008, 07:12:59 PM

Hah!!! Said the member from Lofty Group...

Ouch.

jason · « **Reply #203 on:** July 24, 2008, 05:06:53 PM »

13:35:37 24-07-08 MFS: *CFSRES INC042 24/07/08 13:35,RESPOND RUBBISH FIRE,24 CRAIG TCE,MT BARKER MAP 172 P 14 TG128,BONFIRE IN YARD CONCERN FOR SPARKS AND N,EAR FENCES,SAIR55 MBKR19

13:39:31 24-07-08 MFS: *CFSRES INC045 24/07/08 13:38,RESPOND RCR,SOUTH EASTERN FWY,CALLINGTON MAP 0 0 0 TG206,CITY BOUND ADELAIDE SIDE OF CALLINGTON E,XIT,MBKR19 CALN00

Well Done Barker. Two full crews out during the week day! What is your secret with daytime crewing??

CFS_Firey · « **Reply #204 on:** July 24, 2008, 05:16:29 PM »

Aren't you from Mt Barker jason? You ought to be able to answer that yourself...

jason · « **Reply #205 on:** July 24, 2008, 05:20:15 PM »

hah? Littlehampton mate

CFS_Firey · « **Reply #206 on:** July 24, 2008, 05:23:14 PM »

Quote from: jason on July 24, 2008, 05:20:15 PM

hah? Littlehampton mate

My bad

Zippy · « **Reply #207 on:** July 24, 2008, 05:56:02 PM »

they must just all have jobs within the response area? strange ey...

A more believeable reason, would be minimal crewing of appliances (4 only)?

Cameron Yelland · « **Reply #208 on:** July 25, 2008, 05:44:21 AM »

Quote from: Zippy on July 24, 2008, 05:56:02 PM

they must just all have jobs within the response area? strange ey...

A more believeable reason, would be minimal crewing of appliances (4 only)?

They do that for B Shift so i would imagine it carries through? But why not - 4 crew is sufficient at 99% of jobs and if you need more there is 2 more trucks at barker plus littlehampton only 5 mins down the road.

6739264 · « **Reply #209 on:** July 25, 2008, 08:50:33 AM »

The real secret is the centrelink office and the high proportion of Housing Commission properties in the area.

More brigades would be able to crew two trucks during the day if they got smart about their allocation of crew. Rather than throwing 6 on the one truck and having two at the station doing nothing, send 4 and 4. Really simple...

Mike · « **Reply #210 on:** July 25, 2008, 09:30:30 AM »

Perhaps time to bring it back to Burnside Pumper....

rescue5271 · « **Reply #211 on:** July 26, 2008, 09:03:50 AM »

So when will we see this great pumper?

bittenyakka · « **Reply #212 on:** July 26, 2008, 10:15:14 AM »

last i heard was October- November

Alan J · « **Reply #213 on:** July 28, 2008, 04:36:53 PM »

Quote from: bittenyakka on July 26, 2008, 10:15:14 AM

last i heard was October- November

Any particular year in mind ?

bittenyakka · « **Reply #214 on:** July 28, 2008, 04:58:00 PM »

2008

SA Firey · « **Reply #215 on:** July 28, 2008, 06:51:28 PM »

When it comes it comes, so dont lose any sleep over it

Rainer · « **Reply #216 on:** August 04, 2008, 08:47:02 AM »

Finally worked out a way to get these on here

Side stripes concept only as the Lofty Group are trialling some alternative 'High Viz" marking due to work on the Fwy (fog etc etc)

nest post is a layout dwg.

Rainer

Rainer · « **Reply #217 on:** August 04, 2008, 08:48:29 AM »

as above

bittenyakka · « **Reply #218 on:** August 04, 2008, 10:42:29 AM »

Thanks for posting

looks good

Zippy · « **Reply #219 on:** August 04, 2008, 11:15:00 AM »

Finally!! Thats the best planned appliance ive seen for the CFS...it simply looks practical in every sense!

Awesome work guys for removing the Taxi Stripe look

10/10 for the reflective stripe pattern. I can see it being *very* effective for the times you are out on the freeway particularly in winter.

Any dimensions on the Midship Locker? Im particularly interested in the Depth.

Good work! I like the name of the appliance "Urban Rural Interface Appliance"

Gilly · « **Reply #220 on:** August 04, 2008, 12:00:09 PM »

Mid locker is approx 2100mm wide, and 670mm deep, however it is partially a through locker at the front.

pumprescue · « **Reply #221 on:** August 04, 2008, 12:06:46 PM »

Interesting, can I ask how its an urban interface appliance, they call the 34P an urban interface appliance to ? Does it have the ability to pump and roll or something does it ?

6739264 · « **Reply #222 on:** August 04, 2008, 02:24:32 PM »

Looks good. Three cheers for the rear mount pump.

Are the CABA's still in the cab?

Stefan KIRKMOE · « **Reply #223 on:** August 04, 2008, 08:47:43 PM »

Hi All,

vehicle will have ability to have pump & roll by an aux pump positioned in the drivers side rear lower locker (below hose reel). There will be 3 CABA in cab, 1 being the officer and 2 in the back (next to the doors) with a benchin the middle to be able to carry a crew of 6 total. The main part of the through locker is to be able to carry a ferno 71 litter without putting it on the roof etc... There should be around 6 cubes of locker space at this stage....

Rainer · « **Reply #224 on:** August 08, 2008, 11:31:01 AM »

Not only will it have pump and roll but the auxilary pump is an absolute ball breaker 1.5 AGE Darley coupled to a 18Hp briggs and Stratton which delivers to the hosereels and the "HALO" cab protection system.

The pump is fitted with an "in Cab" remote start and manual activation valve for the "halo" which basically means that the halo system can be activated at any time without leaving the cab.

The locker volume is almost 7.5 cubes.

Rainer

Author Topic: New Burnside Pumper (Read 212738 times)

rescue5271

pumprescue