Author Topic: MFS Change of Quarters (Read 12002 times)

JamesGar · « **on:** February 09, 2005, 06:47:09 PM »

Belair Pumper was responded at 0130 this morning to MFS Headquarters in Adelaide for area coverage whilst the MFS had a 3rd Alarm Factory (?B risk) Fire down Port Road. They were there for about 4 hours, but didn't roll from there. Interesting for the crew was they were able to observe in the MFS comms room for the bulk of there time there. Aparently all the Staff were great towards the crew. I also believe that Athelstone 24P was responded to Glynde Station and Burnside or Stirling to Glen Osmond (though not sure about this). This is becoming more regular for the Belair brigade!

kat · « **Reply #1 on:** February 09, 2005, 10:33:19 PM »

Do the MFS specify training levels of change of quarter crew or is that left to the Brigade? And does everyone have to have BA, RCR, Hazmat (and Level Three of course) to get a guernsey?

Would love to do a shift in Wakefield Street (just once though

)

Firefrog · « **Reply #2 on:** February 10, 2005, 07:13:16 AM »

Not sure of the exact requirements but there is an EMA (Emergency Mutual Aid) standard. Not sure about HAZMAT but BA and RCR are a must.

corocfs · « **Reply #3 on:** February 10, 2005, 03:43:58 PM »

burnside pumper did the change to glen osmond...

i believe that BA would be a must for trucks to have crew for... howeveer i dont think its necessary to have HAZMAT and rescue training/equipment, because i believe belair have neither of these, therefore couldnt provide it.

Good times · « **Reply #4 on:** February 11, 2005, 06:50:24 AM »

It happened again last night, but this time the guys got a run, Athelstone to a cafe fire and Burnside an alarm, as per ema agreement Stirling then moved up to Glen Osmond.

The requirement is minimum 4 crew, all of which are BA, so in other words you could take 6 but 4 MUST be BA, and if you are RCR then you must have RCR operators.

corocfs · « **Reply #5 on:** February 15, 2005, 08:53:08 PM »

plenty of COQ lately...

asides from all the metro changes happening, Napperby CFS did a change of quarters into pt pirire with there 34 while pirie was at a fourth alarm HAZMAT on monday.
bet the lads at Napperby didnt expect that.

Good times · « **Reply #6 on:** February 15, 2005, 10:23:00 PM »

I think Napperby are part of EMA, same as Stirling North

TillerMan · « **Reply #7 on:** August 04, 2005, 04:48:18 PM »

I can't imagine our brigade ever doinig a change of quarters to M.F.S, it would be interesting to do though.

kat · « **Reply #8 on:** August 05, 2005, 12:09:59 PM »

You will have them lining up to have you do change of quarters when you win the lottery and buy that tiller

PF_ · « **Reply #9 on:** February 08, 2006, 06:23:48 PM »

Quote from: Firefrog on February 08, 2006, 07:30:34 AM

When SAMFS have big jobs CFS brigades do COQ to MFS stations.

So if there was a massive fire in Adleiade or surrounding area's, Im talkin 4th alarm big one! Then CFS crews would move into the MFS stations and stay there covering that area until the MFS come back?

Firefrog · « **Reply #10 on:** February 09, 2006, 10:54:45 AM »

Yes - Some CFS in Wakefield St others in strategic MFS stations as required.
Often Burnside, Athelstone, Dalkeith, TTG, Eden Hills, and Others do COQ.

mattb · « **Reply #11 on:** February 09, 2006, 12:33:23 PM »

Under the EMA agreement all it requires is one 3rd alarm incident or multiple 'working' jobs to invoke CFS Change of Quarters.

This is why Morphett Vale got a COQ a couple of weeks ago when MFS had the 2nd alarm Gouchos fire and a Hazmat at Wingfield as well as a couple of other smaller jobs.

PF_ · « **Reply #12 on:** February 09, 2006, 01:36:30 PM »

Do CFS do COQ if a brigade near them has gone out on a job?

medevac · « **Reply #13 on:** February 09, 2006, 02:14:37 PM »

not usually...

calspec · « **Reply #14 on:** February 09, 2006, 09:24:44 PM »

It does happen.

During a recent electrical storm, our brigade (Mawson group) had all three appliances out to fires, small and large, with calls continuing to come in. An appliance from Sturt group was brought in and parked on our apron for a while until things settled down. They returned to their own patch once one of our appliances was freed up and was able to respond within our area.

Firefrog · « **Reply #15 on:** February 10, 2006, 07:33:58 AM »

Yes - I have seen it many times, when a group is streteched strategic appliances are placed to ensure coverage.

mack · « **Reply #16 on:** February 10, 2006, 06:54:00 PM »

yeah... late december coro sent an appliance to change quarters to happy valley... funnily enough though, we got a fixed alarm, then the change of quarters, then a tree fire (Whilst responding to COQ) then another fixed alarm whilst at COQ... luckily we were fully crewed for both trucks at the time... lol

probie_boy · « **Reply #17 on:** February 27, 2006, 10:21:10 AM »

That would be a pretty interesting experience, doing some MFS work. I would'nt mind having a go. Whats the deal with the EMA thing? what happens with it? do you have to do something to get it?

medevac · « **Reply #18 on:** February 27, 2006, 05:25:24 PM »

noticed during the mt barker factory fire, that hahndorf changed quarters to barker, then later meadows changed quarters... just as well, as the got two extra calls during the fire...

calspec · « **Reply #19 on:** February 28, 2006, 09:14:06 AM »

My limited understanding of EMA is thus.

Applies to areas that are covered by both services. Mostly outer Metro and major rural centers (ones that have a MFS station and
CFS brigades).

Is essentially a cooperation between the services to mutually respond to calls in shared areas. As far as what you need to get it. It is predetermined by the location of the brigade. Brigades obviously can only provide the level of service for which they have equipment and training.

An example could be a MVA at O'Halloran Hill, Mets providing rescue, CFS providing fire cover and clean up. A Hazmat incident is another example - MFS may provide Hazard Management. CFS all other requirements

It doesn't have to be that defined either. A four unit response to a nursing home could just mean 2xMFS and 2xCFS or any combination depending on availability.

The big advantage is not tying up all available local services to any one call, freeing up appliances to any subsequent calls.

Just a basic rundown, maybe someone with a little more experience can expand on this.

Alan (Big Al) · « **Reply #20 on:** February 28, 2006, 02:50:02 PM »

Quote from: medevac on February 27, 2006, 05:25:24 PM

noticed during the mt barker factory fire, that hahndorf changed quarters to barker, then later meadows changed quarters... just as well, as the got two extra calls during the fire...

Believe both calls that they got were related to the fire anyhow, Smoke in area near by, and a private alarm to a shop right next to the one that burnt down..

probie_boy · « **Reply #21 on:** February 28, 2006, 03:05:59 PM »

cheers for that.

PF_ · « **Reply #22 on:** February 28, 2006, 08:18:53 PM »

Gawler has an MVA and there is a rubbish fire at Evanston Park, Suppose Elizabeth will do COQ and take the rubbish fire. Un;less a neighbour gets out the garden hose

Author Topic: MFS Change of Quarters (Read 12002 times)

corocfs

Good times

corocfs

Good times

PF_

PF_

probie_boy

probie_boy

PF_