« previous next »
Pages: [1] 2   Go Down

Author Topic: Wajax and Stortz  (Read 15821 times)

Offline CFS_Firey

  • Administrator
  • *****
  • Posts: 2,250
  • Karma: +0/-0
    • View Profile
Wajax and Stortz
« on: October 06, 2008, 04:19:30 PM »
So I notice the new 34's have a combination of Stortz and Wajax couplings.  Wajax for 25mm and 38mm, Stortz for 64mm and above.
The obvious difference to the current coupling system is that 38's and 64's can no longer be coupled together without an adapter, but 25's and 38's can be. 
What are your opinions on this choice?
Logged

Offline SA Firey

  • Forum Group Officer
  • ******
  • Posts: 2,967
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #1 on: October 06, 2008, 04:27:04 PM »
Must have something to do with water conservation...:-P

38-25mm good idea but at least we could use the 64-25mm adaptor on both 64mm and 38mm, restricts us a little bit more in my opinion.

Or just go the Region 7 way Barway to Wajax :-P
Logged
Images are copyright

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Wajax and Stortz
« Reply #2 on: October 06, 2008, 05:09:09 PM »
Quite simply, its retarded.

I'm not a big fan of Wajax fittings even at 25mm. Most people seem to have major issues connecting them together and trying to over tighten the couplings.

I imagine that we are going to see a fair number of 64 Storz -> 38 Wajax adaptors jammed onto the pump panels. Lets hope that CFS don't forget about the number of adaptors they are going to need.
Logged
To think they employed me as a drooling retard...

rescue5271

  • Guest
Re: Wajax and Stortz
« Reply #3 on: October 06, 2008, 05:15:32 PM »
About time they went to this set up most other state's have done it for years and it works well, I would have liked to have seen the 25mm hose removed and more 38mm hose on board,Just keep in mind that wajax couplings are only for low pressure firefighting, I have seen  abrigade put wajax on their HP line only to see the coupling blow off and break...

Stortz,is good for high pressure work,boosting,hose relay pumping and so on, will also make life a lot better when we have to go interstate and work with other fire service's...CFS will now have to provide to each group that is getting the new appliances a set of adaptors for each appliance with in that group...

Logged

Offline CFS_Firey

  • Administrator
  • *****
  • Posts: 2,250
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #4 on: October 06, 2008, 05:24:26 PM »
Quote from: bill - Hynam CFS on October 06, 2008, 05:15:32 PM
About time they went to this set up most other state's have done it for years and it works well,

Don't other states use stortz for 38mm?

Quote from: bill - Hynam CFS on October 06, 2008, 05:15:32 PM
I would have liked to have seen the 25mm hose removed and more 38mm hose on board,Just keep in mind that wajax couplings are only for low pressure firefighting, I have seen  abrigade put wajax on their HP line only to see the coupling blow off and break...

We've been using wajax on our sidelines for ages, and haven't had any problems yet...  Seems a bit strange to go for a standard that can't take high pressure for high pressure hoses? :?

Quote from: bill - Hynam CFS on October 06, 2008, 05:15:32 PM
Stortz,is good for high pressure work,boosting,hose relay pumping and so on, will also make life a lot better when we have to go interstate and work with other fire service's...CFS will now have to provide to each group that is getting the new appliances a set of adaptors for each appliance with in that group...

Wouldn't it make more sense to provide the new trucks with adapters to the old standard?
Logged

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Wajax and Stortz
« Reply #5 on: October 06, 2008, 05:38:16 PM »
Quote from: bill - Hynam CFS on October 06, 2008, 05:15:32 PM
About time they went to this set up most other state's have done it for years and it works well...

...Just keep in mind that wajax couplings are only for low pressure firefighting, I have seen  abrigade put wajax on their HP line only to see the coupling blow off and break...

Stortz,is good for high pressure work,boosting,hose relay pumping and so on...

Yes yes yes! Can't wait to see how the storz holds up to 1200kpa and some nice water hammer, when the 38 line gets a work out. It would be good for the CFS to allow individual brigades to request their hose stowage, rather than have a prescribed number.

Quote from: CFS_Firey on October 06, 2008, 05:24:26 PM
Don't other states use stortz for 38mm?

Some do, others don't...

Quote from: CFS_Firey on October 06, 2008, 05:24:26 PM
We've been using wajax on our sidelines for ages, and haven't had any problems yet...  Seems a bit strange to go for a standard that can't take high pressure for high pressure hoses? :?

Wajax on the sidelines? Are they actually HP lines or just side reels? Can you push 2000-3000kpa through them?

I thought Barway was still the standard for HP lines...?
Logged
To think they employed me as a drooling retard...

Offline Shiner

  • Forum Senior Firefighter
  • ***
  • Posts: 101
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #6 on: October 06, 2008, 05:42:02 PM »
Storz can be a pain on larger diameter (eg 100mm) as the weight of the hose/water can cause them to break their seal.....
Logged
Jason
Swanport Group DGO - Region 3
Jervois CFS Brigade - "Home of the Original Hooker!"

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Wajax and Stortz
« Reply #7 on: October 06, 2008, 05:49:14 PM »
Quote from: Shiner on October 06, 2008, 05:42:02 PM
Storz can be a pain on larger diameter (eg 100mm) as the weight of the hose/water can cause them to break their seal.....

Thats why you rig them with rope to take the weight off the couplings before you use 'em!
Logged
To think they employed me as a drooling retard...

Offline Mike

  • Global Moderator
  • *****
  • Posts: 1,045
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #8 on: October 06, 2008, 05:56:13 PM »
Ill have to re read the study CFS did. I thought they were going to Stortz for everything except 25.
Oh well.
There is a tray with a full set of adapters (not sure what exactly - but the other crew that had a look asure me its enough)
Logged

Offline Zippy

  • Global Moderator
  • *****
  • Posts: 2,540
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #9 on: October 06, 2008, 06:23:04 PM »
Storz 25mm is good stuff, does the job.
Logged

Offline Mike

  • Global Moderator
  • *****
  • Posts: 1,045
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #10 on: October 06, 2008, 06:57:08 PM »
The internal bore of the 25mm stortz wasnt 25mm, that was the limiting factor.
Logged

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Wajax and Stortz
« Reply #11 on: October 06, 2008, 07:07:50 PM »
Quote from: Mike on October 06, 2008, 05:56:13 PM
Ill have to re read the study CFS did. I thought they were going to Stortz for everything except 25.
Oh well.
There is a tray with a full set of adapters (not sure what exactly - but the other crew that had a look asure me its enough)

The AFAC study from a year or two ago suggested 38mm and under to be 'Wajax' and anything above to be 'Storz'.

As long as they have enough adaptors to run boosters and internal hydrants, as well as to connect to other hoses, they'll be fine...

Quote from: Mike on October 06, 2008, 06:57:08 PM
The internal bore of the 25mm stortz wasnt 25mm, that was the limiting factor.

'Limiting' in what sense though? Is it enough to make a real-world difference?
Logged
To think they employed me as a drooling retard...

Offline Zippy

  • Global Moderator
  • *****
  • Posts: 2,540
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #12 on: October 06, 2008, 07:14:52 PM »
if it puts the fire out...with less water....does it succeed at doing its job?
Logged

Offline Mike

  • Global Moderator
  • *****
  • Posts: 1,045
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #13 on: October 06, 2008, 07:19:24 PM »
limiting is their description....

Quote
The AFAC study from a year or two ago suggested 38mm and under to be 'Wajax' and anything above to be 'Storz'.

No dramas
Logged

Offline Cameron Yelland

  • Forum Lieutenant
  • ****
  • Posts: 425
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #14 on: October 06, 2008, 09:37:23 PM »
as i have said before.  if your using 38mm or smaller then volume of water isnt an issue.  a bit of restrictiveness is not going to kill you!
Logged
Compton CFS Brigade
Captain
(Formally Comp00)

Offline Pipster

  • Forum Captain
  • *****
  • Posts: 1,269
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #15 on: October 06, 2008, 10:20:02 PM »
We use our 25mm hose far more than the 38mm or 64mm...there's no way I'm going to drag 5 length of 38 around a scrub fire!!   Going to 25 mm hose in my area was one of the best things we did, equipment wise.

And wajax, sorry, Forestry couplings, are far better than the original BSP couplings we had.

And how are we going to have a problem with couplings at high pressure on the bulk of the CFS fleet?    Your rural, and rural / urban type appliances don't have pumps capable of high enough pressure!!!    :evil:

Pip
Logged
There are three types of people in the world.  Those that watch things happen, those who make things happen, and those who wonder what happened.

Offline CFS_Firey

  • Administrator
  • *****
  • Posts: 2,250
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #16 on: October 07, 2008, 11:20:45 AM »
Quote from: 6739264 on October 06, 2008, 05:38:16 PM
Wajax on the sidelines? Are they actually HP lines or just side reels? Can you push 2000-3000kpa through them?

Just the side reels, but they're about as high pressure as you'd get in the CFS...

Quote from: 6739264 on October 06, 2008, 05:38:16 PM
I thought Barway was still the standard for HP lines...?

Hermaphrodite is the standard for everything now, as far as I am aware...
Logged

Offline Alan J

  • Forum Lieutenant
  • ****
  • Posts: 516
  • Karma: +0/-0
  • Certified Flamin' Nuisance
    • View Profile
Re: Wajax and Stortz
« Reply #17 on: October 07, 2008, 12:41:34 PM »
Quote from: 6739264 on October 06, 2008, 05:38:16 PM

Wajax on the sidelines? Are they actually HP lines or just side reels? Can you push 2000-3000kpa through them?

I thought Barway was still the standard for HP lines...?

I don't think CFS has considered HP lines to come up with a standard coupling
for them.  :?
NSW has gone universally Storz so as not to have safety issues with general
duties couplings finding their way onto on HP lines/pumps (amongst other
considerations).
Only trouble with 25mm Storz is they are very small bore thru the coupling.
Fine for low-flow high-pressure. Not so good if you want to drown something.
Not so good 12 or 15 lengths away from the pump either.  :-(

Logged
Alan J.
Cherry Gdns CFS

Data isn't information.  Information isn't knowledge. 
Knowledge isn't wisdom.

Offline SA Firey

  • Forum Group Officer
  • ******
  • Posts: 2,967
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #18 on: October 09, 2008, 10:08:49 AM »
Having a coupling standard across the board is good, but from what ive been told the new appliances are still having stowage issues as some brigades want more hose than tools and vice versa, but dont have the locker space.

Logged
Images are copyright

Offline Alan J

  • Forum Lieutenant
  • ****
  • Posts: 516
  • Karma: +0/-0
  • Certified Flamin' Nuisance
    • View Profile
Re: Wajax and Stortz
« Reply #19 on: October 10, 2008, 09:48:46 PM »
Quote from: SA Firey on October 09, 2008, 10:08:49 AM
Having a coupling standard across the board is good, but from what ive been told the new appliances are still having stowage issues as some brigades want more hose than tools and vice versa, but dont have the locker space.


<shrug> Old appliances have the same problem.
Would take a -lot- of stowage space to not have that problem !!  :-D


Logged
Alan J.
Cherry Gdns CFS

Data isn't information.  Information isn't knowledge. 
Knowledge isn't wisdom.

Offline bittenyakka

  • Administrator
  • *****
  • Posts: 1,342
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #20 on: October 10, 2008, 10:55:26 PM »
Isn;t it the case of the more space you have the more stuff you carry?
Logged

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Wajax and Stortz
« Reply #21 on: October 11, 2008, 05:15:26 PM »
Oops, better be all picky and point out Storz not StorTz... ;)
Logged
To think they employed me as a drooling retard...

Offline CFS_Firey

  • Administrator
  • *****
  • Posts: 2,250
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #22 on: October 11, 2008, 05:57:23 PM »
Quote from: 6739264 on October 11, 2008, 05:15:26 PM
Oops, better be all picky and point out Storz not StorTz... ;)

Sorry sir..
Logged

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Wajax and Stortz
« Reply #23 on: October 11, 2008, 06:01:47 PM »
Quote from: CFS_Firey on October 11, 2008, 05:57:23 PM
Quote from: 6739264 on October 11, 2008, 05:15:26 PM
Oops, better be all picky and point out Storz not StorTz... ;)

Sorry sir..

Good. Don't let it happen again, or else it'll be the cane.
Logged
To think they employed me as a drooling retard...

Offline bittenyakka

  • Administrator
  • *****
  • Posts: 1,342
  • Karma: +0/-0
    • View Profile
Re: Wajax and Stortz
« Reply #24 on: November 07, 2008, 07:41:39 AM »
does this mean it will now become standard for boosters and hydrants to have stortz on them?
Logged
Pages: [1] 2   Go Up
« previous next »